A hands-on bench. Drag components from the rack onto the breadboard, wire pin-to-pin, dial the supply, and probe the circuit with the digital multimeter. The simulator solves the network with real nodal analysis every time you change anything — node voltages, branch currents, LED glow and lamp brightness are all computed, not faked.
DC Power Supply
V6.0
Supply terminals sit on the breadboard rails (red = +, blue = −).
Components
Selected Part
Click a part on the board to edit its value.
Preset Experiments
Try a preset on the left, or drag a component onto the board.
How to use this bench
- Drag parts from the rack onto the breadboard, or load a preset.
- Pick the Wire tool, click one pin then another to connect them. Holes in the same breadboard column are already joined internally.
- Turn the supply knob; switches, pots and resistor values all update the circuit live.
- Choose V / A / Ohm on the multimeter, then click two pins to measure. In Move mode, drag parts to reposition (wires follow).
AQT-117 TRUE RMSDMM
VOLTS DC
0.00
V
Probes: click the red pin, then the black pin on the board.
Circuit Summary
Supply6.00 V
Total current0.00 mA
Total power0.0 mW
Nodes / branches0 / 0
Node Voltages
| Node | V (volts) |
|---|---|
| No circuit yet. | |
Branch Currents
| Element | I | P |
|---|---|---|
| No circuit yet. | ||